Playing The Connected Source - Onkyo DR-90 Instruction Manual

Playing the Connected Source

This section shows you how to play the sources
connected to the DVD Receiver.
You may need to see "Connecting to a TV"
on page 10 and "Connecting to Audio/Video
Equipment" on page 11 while following the
steps in this section.
Operating with the remote controller
1
Press one of the INPUT SELECTOR
TV
buttons below to select the input
source:
• TV
• TAPE
VIDEO 1 TAPE
• VIDEO 1
• VIDEO 2
When TV is selected
VIDEO 2
2
Start playing the selected source.
Operating with the DVD Receiver
1
Press one of the INPUT SELECTOR
T V buttons below to select the input
source:
• TV
• TAPE/MD
TAPE/MD • VIDEO 1
• VIDEO 2
VIDEO 1
VIDEO 2
2
Start playing the selected source.
28
STANDBY/ ON OPEN/CLOSE DOWN
STANDBY
POWER
VIDEO 1
ON OFF
TAPE/MD
PHONES SPEAKER PRESET / PRESET
DISPLAY SETUP CH LEVEL MODE ADJ ENTER TUNING MEMORY FM MUTE
MODE
About digital sound
If the equipment is digitally connected to the DVD Receiver,
the sound from the digital input will automatically be selected
and reproduced instead of the analog sound as explained
below.
• When the VIDEO 1 source is selected, the digital sound
from the DIGITAL INPUT OPTICAL VIDEO 1 connector is
reproduced.
• When the VIDEO 2 source is selected, the digital sound
from the DIGITAL INPUT COAXIAL VIDEO 2 connector is
reproduced.
When the digital sound is reproduced, the PCM DIGITAL (2
channel digital stereo), DOLBY DIGITAL, or DTS indicator
lights up according to the received sound system in the DVD
Receiver's display.
PCM DIGITAL DOLBY DIGITAL DTS
Enjoying the picture with the sound of
another source
The picture from the last selected VIDEO IN jack (VIDEO 1
or VIDEO 2) continues to be output through the MONITOR
OUT jack even if you change to another audio source.
Therefore, if you select VIDEO 1 or VIDEO 2 first, then select
TAPE/MD, FM, AM, or TV, you can enjoy the VIDEO 1 or
VIDEO 2 picture and the sound from TAPE/MD, FM, AM, or
TV at the same time.
Various Functions While Playing the
Connected Source
To use the following functions, see page 29.
• Adjusting the volume
• Adjusting the tone
• Dimming the DVD Receiver's display
• Listening through headphones
• Using the Sleep Timer
• Muting the sound
Enjoying the Sound Effects While
Playing the Connected Source
See page 30.
MASTER VOLUME
UP PAUSE STOP PLAY
SURROUND
Re - EQ MODE
VIDEO 2 DVD
INPUT SELECTOR
LATE NIGHT
T V F M A M
BASS TREBLE
1
LEVEL SETUP
SENDING/
DVD RECEIVER TV
LEARNED
POWER
SLEEP DIMMER DISPLAY
ON STANDBY
TITLE MENU SURROUND MODE
INPUT SELECTOR
ENTER
DVD TV
1
RETURN SETUP VIDEO 1 TAPE
CH SEL VIDEO 2 TUNER
1 2 3
TEST
LEVEL
TONE AUDIO SUBTITLE
4 5 6
ANGLE ZOOM
7 8 9
OPEN/
SEARCH CLEAR
CLOSE
+10 0
POWER
FR PAUSE FF MUTING
TV/ VCR
CHANNEL
DOWN PLAY UP
TUNER
RANDOM STOP SLOW PRESET
VOLUME
REPEAT A-B MEMORY
REMOTE CONTROLLER RC-399M
Note
When MPEG2 sound
source is reproduced,
the PCM DIGITAL
indicator lights. No
sound is output from
the subwoofer.