Onkyo DR-90 Instruction Manual page 21

DVD
If the screen on the right appears
– Screen Saver
If you pause a picture for a long while,
the screen saver operates. (You can
set this function to Off. See page 53.)
To resume normal display, press
PLAY.
DVD
To play NTSC discs (Multisystem TV is needed)
Set "PAL/Auto" to "Auto" using the menu explained in
"Customizing the Function Settings" starting from page 44.
See page 49 for direct information.
To remove the disc
Press OPEN/CLOSE to open the disc tray.
Remove the disc after the disc tray opens completely.
After removing the disc, be sure to press the button again to close
the tray.
To pause playback (still mode)
Press PAUSE during playback.
To start playback, press PLAY.
DVD
To play frame by frame
Press the button repeatedly during pause. Each time you press the
button the picture advances one frame.
To resume normal playback, press PLAY.
Note
The sound is muted during still mode and frame by frame playback.
To stop playback
Press STOP.
When you press PLAY to restart playback, playback starts from the
location where you stopped playback because the location index is
stored in memory.
Note
The location where playback resumes may vary depending on the disc or the
stopped scene.
Resuming playback from the beginning
Press STOP again after stopping playback to clear the location index memory,
then press PLAY to start playback.
DVD
Playback starts from the beginning of the current title.
To start playback from the beginning of the DVD video, open and
close the disc tray (press OPEN/CLOSE twice) then press PLAY to
start playback.
CD Playback starts from the beginning of the disc.
Note
The location index memory will also be cleared when:
• The power cord is unplugged,
• The DVD Receiver has entered standby mode,
• The disc tray is opened, and
• The parental lock setting is changed (see page 54) or a disc menu
language is selected (see page 46).
DVD
Tip to obtain a higher quality picture
Occasionally, some picture noise not usually visible during a
normal broadcast may appear on the TV screen while
playing a DVD video because the high resolution pictures on
these discs include a lot of information. While the amount of
noise depends on the TV you use, you should generally
adjust the TV to reduce sharpness when viewing DVD
videos.
DVD CD
DVD
3
DVD
CD
3
DVD CD
Notes
• When you start playing a CD, the sound may not be
reproduced briefly while the DVD Receiver recognizes
the sound system (DTS Surround or PCM). If this
happens, stop playback by pressing STOP twice, then
press PLAY to restart playback. The sound will be
reproduced from the beginning of the disc.
• Do not move the DVD Receiver during playback. Doing
so may damage the disc.
• Use OPEN/CLOSE on the remote controller or DVD
Receiver to open and close the disc tray. Do not touch
the disc tray while it is moving. Doing so may cause the
DVD Receiver to malfunction.
• Do not press down on the disc tray or put any objects
other than playable discs on the disc tray. Doing so may
cause the DVD Receiver to malfunction.
• In many instances, a menu screen appears when
playback of a movie is complete. Prolonged display of an
on-screen menu may damage your television set,
permanently etching that image onto its screen. To avoid
this, be sure to press STOP once the movie is complete.
This switch must be set to
DVD RECEIVER.
LEVEL SETUP
SENDING/
DVD RECEIVER TV
LEARNED
POWER
SLEEP DIMMER DISPLAY
ON STANDBY
TITLE MENU SURROUND MODE
INPUT SELECTOR
ENTER
DVD TV
RETURN SETUP
VIDEO 1 TAPE
CH SEL VIDEO 2 TUNER
1 2 3
TEST
LEVEL
AUDIO SUBTITLE
TONE
4 5 6
ANGLE ZOOM
8 9
7
OPEN/
SEARCH CLEAR
CLOSE
+10 0
POWER
FR PAUSE FF MUTING
TV/ VCR
CHANNEL
DOWN PLAY UP
TUNER
PRESET
RANDOM STOP SLOW
VOLUME
REPEAT A-B MEMORY
RC-399M
REMOTE CONTROLLER
(Continued on next page.)
1
21