Speaker Setup - Onkyo DR-90 Instruction Manual

Onkyo dvd receiver instruction manual dr-90
Hide thumbs Also See for DR-90:
Table of Contents

Advertisement

Speaker Setup

Before operating your stereo system, you need to set up
the speaker configuration and the distance from the
listening position to each speaker.
Note
It is not necessary to set the parameters again once you have
completed the setup (with one exception*) unless you change the
speaker configuration.
* See "To Listen to a High-Frequency/High-Quantization Format
Source in its Original Sound Quality – 96k Sound" on page 40.
1
Press SPEAKER SETUP to display
the subwoofer configuration.
SPEAKER
The subwoofer configuration appears in
SETUP CH L
the DVD Receiver's display.
MODE
2
Press MODE ADJ
either "YES" (when a subwoofer is
PRESET /
MODE ADJ
connected) or "NO" (when no
subwoofer is connected).
If you select "NO," the configuration of the
front speakers is automatically set to
"LARGE." In this case, skip the next step
and go to step 4.
3
Press ENTER, then press MODE
ENTER
ADJ
"LARGE" (when large–wideband–
front speakers are connected) or
"SMALL" (when small–with limited
bass signal handling–front
PRESET /
MODE ADJ
speakers are connected).
4
Press ENTER, then press MODE
ENTER
ADJ
"LARGE" (when a large center
speaker is connected), "SMALL"
(when a small center speaker is
PRESET /
connected), or "NONE" (when no
MODE ADJ
center speaker is connected).
Note
If the front speaker configuration is set to
"SMALL" in step 3, "LARGE" will not appear in
this step.
18
/
to select
/
to select either
/
to select either
STANDBY/ ON
OPEN/CLOSE
STANDBY
POWER
ON
OFF
PHONES
SPEAKER
PRESET /
DISPLAY
SETUP CH LEVEL
MODE ADJ
ENTER
TUNING
MODE
2-8 3-9
1
5
Press ENTER, then press MODE
ENTER
ADJ
/
"LARGE" (when large surround
speakers are connected), "SMALL"
(when small surround speakers are
PRESET /
connected), or "NONE" (when no
MODE ADJ
surround speakers are connected).
Note
If the front speaker configuration is set to
"SMALL" in step 3, "LARGE" will not appear in
this step.
6
Press ENTER, then press MODE
ENTER
ADJ
/
distance between your listening
position and one of the front
speakers.
PRESET /
MODE ADJ
• Set the value closest to the actual
distance.
The distance from the listening position
to one of the front speakers must be the
same as the distance to the other
speaker.
• To increase the value, press MODE ADJ
.
• To decrease the value, press MODE ADJ
.
• You can select a distance between 1 and
9 m.
MASTER VOLUME
DOWN
UP
PAUSE
STOP
PLAY
SURROUND
Re - EQ
MODE
VIDEO 1
VIDEO 2
DVD
INPUT SELECTOR
LATE NIGHT
TAPE/MD
T V
F M
A M
BASS
TREBLE
PRESET
MEMORY
FM MUTE
to select either
repeatedly to enter the

Advertisement

Table of Contents
loading

Table of Contents