Connecting To Audio/Video Equipment - Onkyo DR-90 Instruction Manual

Connecting to Audio/Video Equipment

Before connecting
• Refer also to the instruction manual of each component to be
connected.
• When you connect the DVD Receiver to audio/video equipment, be
sure to turn off the power and unplug all the units from the mains before
making any connections.
• About the VIDEO 1 jacks/connectors
The video input and output connections are also necessary even if you
make the S video input and output connections.
Stereo audio connection cable
CENTER SURROUND
SPEAKER SPEAKERS
R
R
Audio/video connection cable
Video Disc Player/
Video Cassette Player
MD Recorder/DAT/
Stereo cassette tape deck
To audio
To audio
output
inputs
(play) (rec)
This connection is only for
equipment with a digital
optical audio input.
Digital recording is not always
possible; therefore, also
connect to the analog TAPE/
MD OUT (REC) jacks (see
page 58 for recording sound).
ANTENNA
S VIDEO
CENTER SUBWOOFER
PRE OUT
( REC )
FM AM
75 OUT
TAPE / MD
I N
( PLAY )
TV I N
FRONT SPEAKERS
OUT
L R L
VIDEO 1
I N
VIDEO 2
I N
L R L
R L VIDEO
Audio/video
connection
cable
To audio
To audio
outputs
outputs
To digital
coaxial audio
output
This connection is only for equipment with a digital coaxial audio output.
• Connect the plugs securely.
To digital optical
audio input
Optical fiber cable
DIGITAL OUTPUT
MONITOR
OPTICAL OPTICAL VIDEO 1
OUT
OUT
VIDEO
1
I N
AC CONNECTOR
MONITOR
OUT
To audio
inputs
VCR
Coaxial connection cable
: Signal flow
Remove the protective caps before making
connections. When not in use, be sure to
replace them.
Do not connect the mains lead
at this time.
DIGITAL INPUT
COAXIAL VIDEO 2
S video
connection cable
The OPTICAL VIDEO 1 IN
connector is for equipment
with a digital audio output
such as a satellite tuner which
is to be connected to analog
VIDEO 1 connectors instead
of a VCR.
To connect to the OPTICAL
VIDEO 1 connector, use an
optical fiber connection cable.
If the equipment doesn't have
recording functions, you may
leave the analog VIDEO 1
OUT connectors
disconnected.
Incomplete
Insert completely
11