Connecting An Onkyo Dock - Onkyo TX-NR1008 Instruction Manual

*2
The following iPod models are not supported in Standard
Mode. These iPod models can only be controlled in Extended
Mode.
• iPod (5th generation)
• iPod nano (1st generation)

Connecting an Onkyo Dock

No. Onkyo Dock
UP-A1 Dock
A
(Universal Port Option Dock)
ND-S1
B
RI Dock
C
Models sold are different depending on the region.
En
80
B A
*1
Cable
—
Optical digital audio
Coaxial digital audio
u cable
*1
Analog audio (RCA)
Component video
Y
P /C
B B
P /C
R R
Composite video
u cable *1
*3
When you disconnect the iPod/iPhone, the AV receiver stores
the mode. This means that if you disconnect when in
Extended Mode, the AV receiver will start in Extended Mode
when you next connect the iPod/iPhone.
*4
Displays a list.
*5 Plays all tracks in random order.
*6 Displays information about currently playing track.
C
Note
• When UP-A1 Dock that seated iPod is con-
nected, the power consumption on standby
mode slightly increases.
• You can control your iPod when "PORT" is
selected as the input source.
• See the UP-A1 Dock's instruction manual for
more information.
• See the ND-S1's instruction manual for more
information.
*1 The ND-S1's audio outputs are digital out-
puts. If the digital audio input on your AV
receiver cannot be assigned to an input selec-
tor whose Input Display can be set to
"DOCK", do not connect the u cable, oth-
erwise a malfunction may occur.
• See the RI Dock's instruction manual for more
information.
To use u (Remote Interactive), you must
*1
make an analog audio connection (RCA)
between the AV receiver and the RI Dock.
Page
81
81
82