Related Manuals for Onkyo TX-NR1030
Summary of Contents for Onkyo TX-NR1030
- Page 1 TX-NR1030 AV RECEIVER Basic Manual Advanced Manual found here http://www.onkyo.com/manual/txnr1030/adv/en.html...
- Page 2 Zone 2) Advanced Connection 32 bit DSP (Digital Signal Processor) with excellent Remote control sensor Connecting and Operating Onkyo RI Components calculation performance AV Receiver Control Function between the Unit and External Music Optimizer™ for Compressed Digital Music files...
- Page 3 Step 1: Connections Personal computer HDMI HDMI To use the ARC function, connect to the ARC HDMI cable compatible HDMI jack of the TV and make an appropriate setting on the unit. See "2nd Step : Source Connection" of "Step 2: Setting Up". HDMI HDMI HDMI...
-
Page 4: Audio/Video Signal Connection
Step 1: Connections Use a composite video cable to connect a TV with The unit supports the HDMI Through function that allows Audio signal connection transmission from players to the TV even if the unit is in composite video input jack or a player with composite Digital connection: Use a digital optical cable standby. - Page 5 Step 1: Connections back speakers need to be installed. place Height speakers in a combination Connecting speakers Although Height 1 speakers can pattern other than those specified. enhance surround effects, we Dolby recommends to place the speakers recommend you to add Height 2 as described on “Installing speakers in Speaker layout speakers in order to ensure full effects.
- Page 6 Step 1: Connections Installing speakers in ceiling Surround R Surround back R Surround back L Surround L If you use only one surround back speaker, connect it to the BACK L terminal. Top Front Top Middle Top Rear Ceiling speakers, etc. are used for maximizing effects in Dolby Atmos or Dolby Surround listening mode.
- Page 7 Step 1: Connections 1/2"-5/8"(12-15 mm) Assemble the AM loop antenna (supplied). Cut and remove the plastic coating from the end of the speaker cable, twist the core and connect it to the terminal. When using commercially available banana plugs: Make correct connection between the unit's jacks and tighten the speaker terminals to the end and then insert the speaker's jacks (+ to + and - to -) for each channel.
- Page 8 Step 2: Setting Up Important: When the unit is turned on for the first time, the You cannot return to the previous screen during speaker Making the Initial Setup with the Setup Wizard setup wizard of the section 2 will automatically be launched. setup, even if you press RETURN.
- Page 9 If you select "No" and press ENTER, the error cause "ONK" for ONKYO) and search for the remote control code. frighten young children. will be displayed. Follow the guidance to remove the The guidance will also explain how to set the remote controller.
- Page 10 Step 2: Setting Up 4th Step : Network Connection does not stay lit, connection has not been established. Wi-Fi Setup Make the setting again. If "Push Button" does not work, Select the authentication method. try "Enter Password". Initial Setup Network Connection When the access point is not displayed Do you want to connect network connection? It gives you network services that our AV...
- Page 11 Step 3: Playing Back Remote Controller Parts Name Playing the player and TV 2 RED RECEIVER SOURCE ZONE 3 GREEN zRECEIVER button: Turns the unit on or into standby SLEEP mode. RECEIVER SOURCE ZONE 2 RED ALL OFF MY MOVIE MY TV MY MUSIC GREEN...
- Page 12 Step 3: Playing Back Listening Modes "Bass": Allows you to enhance or moderate the low Listening to AM/FM Radio pitched range. "Treble": Allows you to enhance or moderate the high You can select a listening mode from various options such pitched range.
- Page 13 Step 3: Playing Back Playing Sound of the Bluetooth-enabled Device Connecting and playing the Bluetooth- Using the Home menu If the unit is on and the Bluetooth-enabled device is enabled device connected, the input will be automatically switched to In the Home menu, you can make advanced setup and BLUETOOTH.
- Page 14 Step 3: Playing Back Network Service: Select to use Internet radio services Subwoofer 1/2 Level, Center Level: Adjust the speaker Using Quick Setup menu and the DLNA function. When you connect the unit to the level while listening to the sound. The adjustment you network and press ENTER, the network service screen will made will be reset to the previous status when you turn be displayed on the TV.
- Page 15 Step 3: Playing Back Screen Centered Dialog: Height speakers are used to This function may not be effective depending on the Listening Mode: Select the listening mode from the move acoustic images such as dialogs from the center selected listening mode or input source. categories of "MOVIE/TV", "MUSIC", "GAME"...
- Page 16 Step 3: Playing Back broadcasting. For Zone 3, any can be selected from among Change the setting: Press RECEIVER and then HOME Using the multi-zone function an external device connected to the analog audio input on the remote controller, select "Setup" - "1.Input/Output jacks ( ) of the unit, the "NET", "USB"...
- Page 17 Pure Audio, it will automatically Volume adjustment can be performed only from the unit. switch to Direct. While Zone 2 or Zone 3 is on, the RI linked system function (interlink between Onkyo components) is disabled. Zone 2 Zone 3 Performing Multi-zone Playback...
- Page 18 4 5 6 (European model) Q R S T Front Panel zON/STANDBY button: Turns the unit on or into DISPLAY button: Switches the information on the Display standby mode. MASTER VOLUME control and indicator: Allows you display. PURE AUDIO button and indicator: Switches to the to adjust the volume.
- Page 19 DIMMER button (North American models): Switches the brightness of the display. RT/PTY/TP button (European model): Can be used when receiving the station transmitting text information. MEMORY button: Registers or deletes a station. TUNING MODE button: Switches the tuning mode. USB port: A USB storage device is connected so that music files stored in it can be played.
- Page 20 GND terminal: The ground wire of the turntable is RI REMOTE CONTROL jack: An Onkyo product with RI connected devices. connected. jack can be connected and synchronized with this unit.
-
Page 21: Troubleshooting
Troubleshooting HDMI control does not function correctly. Resetting the unit Before starting the procedure Set the CEC link function of the unit to on. It is also Problems may be solved by simply turning the power Resetting the unit to the status at the time of shipment may necessary to make the HDMI linked system setting on on/off or disconnecting/connecting the power cord, solve the problem. - Page 22 Specifications Specifications Amplifier Section Network Section Audio Format Dolby Atmos, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD, Multichannel PCM Rated Output Power Ethernet LAN Supported All channels: 135 watts minimum continuous power per channel, 8 10BASE-T/100BASE-TX 3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD), ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum...
-
Page 23: License And Trademark Information
| 11.1 are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved. Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license. not be used in any manner other than previously approved by the appropriate Other trademarks and trade names are those of their respective owners. - Page 24 – Con la presente Onkyo Corporation dichiara che questo TX-NR1030 è – Hér með lýsir Onkyo Corporation því yfir að varan TX-NR1030 er í – Limitation of voltage changes, voltage conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite fluctuations and flicker dalla direttiva 1999/5/CE.