Onkyo TX-NR1008 Instruction Manual page 23

■
"Monitor Out" setting set to "Analog"
Video input signals flow through the AV receiver as
shown, with composite video, S-Video and PC IN (Analog
RGB) sources being upconverted for the component video
output. Use this setting if you connect the AV receiver's
COMPONENT VIDEO MONITOR OUT to your TV.
Composite video is upconverted to S-Video and S-Video
is downconverted to composite video. Note that these con-
versions only apply to the MONITOR OUT V and S out-
puts, not the VCR/DVR OUT V and S outputs.
The composite video, S-Video and component video out-
puts pass through their respective input signals as they are.
This signal flow also applies when the "Resolution" set-
ting is set to "Through" (➔
Video Signal Flow and the Resolution Setting
When the "Monitor Out" setting is set to "Analog"
43), if the "Resolution" setting is set to anything
(➔
other than "Through" (➔ 44), the video signal flow
will be as shown here, with composite video and
S-Video sources being upconverted for the component
video output.
The composite video, S-Video and component video
outputs pass through their respective analog input sig-
nals as they are. HDMI input signals are not output.
Audio Connection Formats
Audio component can be connected by using any of the
following audio connection formats: analog, analog multi-
channel, optical, coaxial, or HDMI.
When choosing a connection format, bear in mind that the
AV receiver does not convert digital input signals for ana-
log line outputs and vice versa. For example, audio signals
connected to an optical or coaxial digital input are not out-
put by the analog VCR/DVR OUT.
If signals are present at more than one input, the inputs
will be selected automatically in the following order of pri-
ority: HDMI, digital, analog.
44).
Video Signal Flow Chart
Blu-ray Disc/DVD player, etc.
Composite S-Video
AV receiver
Composite S-Video
TV, projector, etc.
*1 PC IN (Analog RGB) input signal is output
at 720p resolution.
Video Signal Flow Chart
Blu-ray Disc/DVD player, etc.
Composite S-Video
AV receiver
MONITOR OUT
Composite S-Video
TV, projector, etc.
Audio Signal Flow Chart
Blu-ray Disc/DVD player, etc.
Analog Multichannel
1
*
AV receiver
3
*
Analog
TV, projector, etc.
*1 Depends on the "Audio TV Out" setting
*2
This setting is available, when "Audio Return Channel"
setting is set to "Auto" (➔
input selector and your TV must support ARC function.
*3 Only the front L/R channels are output.
Component HDMI
PC IN
(Analog RGB)
IN
MONITOR OUT
HDMI
Component
* 1
Component HDMI
IN
Component HDMI
Coaxial HDMI
Optical
IN
1 3
* * 1
* * 1
OUT
HDMI
1
*
(➔ 58).
59), you must select the TV/CD
2
*
En
23