Turning On & Basic Operations; Turning On/Off The Av Receiver; Turning On; Turning Off - Onkyo TX-NR1008 Instruction Manual

Turning On & Basic Operations

Turning On/Off the AV Receiver

(North American and
Taiwan models)
ON/STANDBY
STANDBY indicator

Turning On

1
(European and Asian models)
Set POWER to the ON position ( ) on the front panel.
The AV receiver enters Standby mode, and the STANDBY indicator comes on.
2
Press ON/STANDBY on the front panel.
or
Press RECEIVER followed by ON on the remote controller.
The AV receiver comes on, the display lights, and the STANDBY indicator goes off.
Pressing the remote controller's ON again will turn on any components connected via u.

Turning Off

Press ON/STANDBY on the front panel.
or
Press RECEIVER followed by STANDBY on the remote controller.
The AV receiver will enter Standby mode. To prevent any loud surprises when you turn on the AV receiver, always
turn down the volume before you turn it off.
(European and Asian models)
To completely shut down the AV receiver, set POWER to the OFF position ( ).
En
24
(European and Asian models)
ON/STANDBY
STANDBY indicator
POWER
STANDBY
ON
RECEIVER