Onkyo TX-NR1008 Instruction Manual page 45

HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to HDMI
IN 2, you must assign "HDMI 2" to the "BD/DVD" input
selector.
If you've connected your TV to the AV receiver with an
HDMI cable, composite video, S-video and component
video sources can be upconverted
HDMI output *1 . You can set this for each input selector by
selecting the "- - - - -" option.
Composite video, S-Video,
component video
Composite video, S-Video,
component video
*1
This applies only when "Monitor Out" setting is set to other
than "Analog" (➔ 43).
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
PC
AUX
TUNER
TV/CD
PHONO
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,
TV/CD, PHONO, PORT
HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5,
HDMI 6:
Select the HDMI IN to which the video component
has been connected.
- - - - -:
Output composite video, S-Video, and component
video sources from the HDMI output. The video out-
put signal from the HDMI output is the one config-
ured in "Component Video Input"
• "AUX" is used only for input from the front panel.
• Each HDMI input cannot be assigned to two input selec-
tors or more. When HDMI 1 - HDMI 6 have already
been assigned, you must set first any unused input selec-
tors to "- - - - -" or you will be unable to assign HDMI 1
- HDMI 6 to input selector.
* and output by the
HDMI
IN
OUT
HDMI
Default assignment
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
FRONT (Fixed)
- - - - - (Fixed)
- - - - -
- - - - -
- - - - -
(➔ 45).
Note
• For composite video, S-Video, and component video upconver-
sion for the HDMI output, the "Monitor Out" setting must be
set to other than "Analog" (➔
ting must be set to "- - - - -". See "Video Connection Formats"
for more information on video signal flow and upconversion
(➔ 22).
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
source based on the setting of "Component Video Input".
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the "Digital
Audio Input" (➔ 46). In this case, if you want to use the coaxial
or optical audio input, make the selection in the Audio Selector
in the Home menu (➔ 27).
• "TUNER" selector cannot be assigned and is fixed at the
"- - - - -" option.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to "PORT" selector.
• Do not assign the component connected with the HDMI input to
"TV/CD" selector when you set "TV Control" setting to "On"
(➔ 59). Otherwise, appropriate CEC (Consumer Electronics
Control) operation will not be guaranteed.
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN 2" to
the "BD/DVD" input selector.
If you've connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are upcon-
* and output by the COMPONENT VIDEO MONI-
verted
TOR OUT *1 . You can set this for each input selector by
selecting the "- - - - -" option.
Composite video, S-Video
IN
OUT
Composite video, S-Video
*1 This applies only when "Monitor Out" setting is set to "Ana-
43).
log" (➔
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
PC
AUX
TUNER
TV/CD
PHONO
PORT
43), and the "HDMI Input" set-
Component video
Component video
Default assignment
IN 1
- - - - -
IN 2
- - - - -
- - - - -
- - - - -
- - - - - (Fixed)
- - - - -
- - - - -
- - - - -
En
45