Connecting An Onkyo Dock - Onkyo TX-NR708 Instruction Manual

*2
The following iPod models are not supported in Standard
Mode. These iPod models can only be controlled in Extended
Mode.
• iPod (5th generation)
• iPod nano (1st generation)

Connecting an Onkyo Dock

No. Onkyo Dock
UP-A1 Dock
A
(Universal Port Option Dock)
ND-S1
B
RI Dock
C
Models sold are different depending on the region.
En
74
B A
*1
Cable
—
Optical digital audio
Coaxial digital audio
u cable
Analog audio (RCA)
Component video
Y
P
P
Composite video
u cable
*3
When you disconnect the iPod/iPhone, the AV receiver stores
the mode. This means that if you disconnect when in
Extended Mode, the AV receiver will start in Extended Mode
when you next connect the iPod/iPhone.
*4
Displays a list.
*5 Plays all tracks in random order.
*6 Displays information about currently playing track.
C
Note
• When UP-A1 Dock that seated iPod is connected,
the power consumption on standby mode slightly
increases.
• You can control your iPod when PORT is
selected as the input source.
• See the UP-A1 Dock's instruction manual for
more information.
• See the ND-S1's instruction manual for more
information.
*1 The ND-S1's audio outputs are digital outputs.
If the digital audio input on your AV receiver
cannot be assigned to an input selector whose
Input Display can be set to "DOCK", do not
*1
connect the u cable, otherwise a malfunction
may occur.
• See the RI Dock's instruction manual for more
information.
*1 To use u (Remote Interactive), you must
make an analog audio connection (RCA)
between the AV receiver and the RI Dock.
/C
B B
/C
R R
*1
Page
75
75
76