Installing The Scanner - Panasonic KX-PS8000 Setup Manual

Installing the Scanner

The scanner can be installed using two methods:
Method A. On top of the printer
Method B. On left or right side of the printer
A
B
For method A, perform the following
procedure.
1
Remove the two top hole covers with
a small flat-blade screwdriver, then
remove the two screws from the
printer.
22
2
Install the guide pins and tighten them
with a flat-blade screwdriver.
3
Match the guide pins to the holes
under the scanner, and place the
scanner gently onto the printer.
Safety Caution:
B The scanner weighs approximately 17.3 k
{38.1 lbs.}. It must be handled by two people.
4
Lock the scanner by sliding it toward
the right.
g