Panasonic DP-1820P Service Manual page 212

No. Parameter
068 NYSE Fax
Forward
(USA and Canada
Only)
069 NYSE Local Print
(USA and Canada
Only)
070 Line Error
071 Total Error
072 Continuous Error 1 = Off (unlimited)
073 Error Detect
074 RTN Receive
075 Coding
076 Batch TX
(USA and Canada
Only)
077 RX JAM Length
078~ Not Used
079
080 Doc Top Feed
081 Doc End Feed
Ver. 1.2
Function Parameter Table
Selections
1 = Off
2 = On
1 = Inc
2 = On (Always)
128 lines
256 lines
512 lines
1024 line
2048 lines
Off
(will not disconnect line)
1 = 5%
2 = 10%
3 = 15%
4 = 20%
2 = 3 lines/STD
3 = 6 lines/STD
4 = 12 lines/STD
1 = Lines
2 = Rate
1 = Disconnect
2 = Continue
1 = MH (MH only)
2 = MR (MH or MR)
3 = MMR
(MH or MR or MMR)
4 = JBIG
1 = Off
2 = On
1 = Off (unlimited)
2 = 2 m
-99
~
+99
-90
~
+127
Selects whether the machine will forward the
incoming and outgoing faxes to a specified station.
Note:
Once this parameter is activated, Fax
Forwarding via Fax Parameter No. 054 is
automatically disabled, an Access Code of
"0000" is automatically assigned and Fax
Parameter No. 038 has a new setting added
called "NYSE".
Selects the printing condition for the incoming faxes
after FAX Forwarding.
INC. : Prints only if FAX Forwarding fails.
ON : Always prints.
1. Selects the line disconnect condition during
reception. If the number of line errors exceed this
setting, the unit will disconnect the line.
Press "V" or "/\ " to select the symbol rate.
2. Selects the transmit condition of RTP/PIP or
RTN/PIN.
(Available if No. 73 Error Detect is set to
"LINES") (See Note 1)
Selects the transmit condition of RTP/PIP or RTN/
PIN.
(Available if No. 73 Error Detect is set to "RATE".)
(See Note 2)
Selects the continuous total error criteria of Off/3/6
or 12 lines in Standard mode. If continuous total
error exceeds this setting, the unit will transmit
RTN/PIN.
(Available if No. 73 Error Detect is set to "RATE".)
Selects the error detect condition Lines/Rate.
Selects whether to disconnect the phone line or
continue when "RTN" is received.
Selects the coding scheme.
Selects whether the batch transmission is available.
Selects the maximum length of a received
document that can be printed.
Adjusts the distance between the scanning sensor
ON position and the scanning start position.
Adjusts the distance between the scanning sensor
OFF position and the scanning end position.
212
DP-1520P/1820P/1820E
Function
SEP 2004