Installing The Internet Fax / E-Mail Module (Da-Nf180) For Dp-1820P/1820E - Panasonic DP-1820P Service Manual

8.5. Installing the Internet Fax / E-Mail Module (DA-NF180)
for DP-1820P/1820E
8.5.1. Contents
Qty.
1 Hardware Key
1 Key Assembly
1 Quick Guide
1 Operating Instructions CD
1 Firmware CD
1 Installation Instructions
Note:
1. Verify the Firmware version of your machine first. In order to support the Fax function, the
Firmware version must be V1.xx or higher, and if required, it is important that you update it
when instructed to do so in the Installation Instructions.
2. The part number(s) may differ depending on the Destination.
3. Refer to the Parts List in the Parts Manual.
8.5.2. Installation
CAUTION!
Turn the Power Switch on the Right Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord, if the Fax Option is installed.)
Ver. 1.2
Description Part No.
----- IFX KEY
See Note
See Note
For Facsimile and Internet FAX/Email
See Note
See Note
DZSM000814 This document
(1) Open the Left Cover.
(2) Remove 2 Silver Screws.
(3) Remove the Left Scanner Cover.
(4) Remove 2 Shoulder Silver Screws.
(5) Remove the Right Scanner Cover.
(6) Remove 2 Silver Screws.
(7) Slightly lift the Control Panel Assembly.
(8) Disconnect the Harness on the PNL1 PC Board
(CN220).
(9) Remove the Control Panel Assembly.
335
DP-1520P/1820P/1820E
Remarks
SEP 2004