1. General
The Local Firmware Update Tool (Parallel/USB) allows a Panasonic Fax/Copy machine to emulate a Flash
Memory Card Writer and create a Master Firmware Card, or to program the Firmware Code Memory of the Unit
directly. Using a PC, the firmware code is transferred to the Flash Memory Card or the Firmware Code Memory of
the Unit through the Parallel/USB Port on the Panasonic Fax/Copy machine. The installation and operation are
very similar to the Printer Interface.
1.1 Supporting OS
This application software operation has been confirmed under the following OS
•
Windows 98 / Me
•
Windows NT 4.0 (Parallel Port only)
•
Windows 2000 / XP
1.2 Supporting Panasonic Fax/Copier Models
A list of the compatible Panasonic Fax/Copy machines are shown below:
Parallel Port Models
Programming a Flash Memory Card
•
DP-130/135/150
•
DP-1510/1810/2010
•
DP-2000/2500/3000
•
DP-3510/4510/6010, DP-3520/4520/6020, DP-3530/4530/6030
•
UF-585/595/590/790/885/895/890/990, DX-2000
Direct Firmware Update
•
DP-1510/1810/2010
•
DP-3510/4510/6010, DP-3520/4520/6020, DP-3530/4530/6030
•
UF-E1
•
UF-490/525/UF-590/790
USB Port Models
Programming a Flash Memory Card
•
DP-180/190, UF-9000
•
DP-1520/1820
•
DP-2310/3010, DP-2330/3030
Direct Firmware Update
•
DP-180/190, UF-9000
•
DP-1520/1820
•
DP-2310 / 3010, DP-2330/3030
•
UF-7100/8000/8100
Note:
1. Depending on the destination, some Panasonic models may not be available.
2. Some UF-E1 models with the earlier versions of firmware will not support Parallel Firmware Update. Please
confirm whether your machine's firmware version supports Parallel Firmware Update with your service provider.
Local Firmware Update Tool (Parallel/USB Port)
Page 3