Installing The Toner Bottle - Panasonic DP-1820P Service Manual

Ver. 1.2
(25) Install the Process Unit.
Caution:
To prevent damage to the Process Unit, ensure
that the Left Cover is still open before inserting the
Process Unit into the machine.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
(26) Fasten the Process Unit with 1 Screw.
(27) Connect the Harness and reinstall the Connector
Cover and Screw.
<Installing the Toner Bottle>
(28) Shake the Toner Bottle 10 to 15 times to loosen
the contents.
(29) Remove the Tape as illustrated, however, do not
open the Shutter or Toner will spill.
(30) Insert the Toner Bottle into the Hopper Unit.
Align the Toner Bottle Key with the Key
Alignment Channel of the hopper unit. Insert the
Bottle as far as it will go and turn the Toner Bottle
clockwise until it locks in place. (Bottle's Green
Knob is lined up with the "Locked" symbol on the
label)
Caution:
Do Not install the Toner Bottle before installing
the Process Unit first. If the Toner Bottle is installed
and turned to the "Locked" position without the
Process Unit, the Toner will spill inside the
machine.
319
DP-1520P/1820P/1820E
SEP 2004