F8 Mode: Service Adjustment - Panasonic DP-1820P Service Manual

No.
25 Fax Transmit Count
26 Fax Receive Count
27 Fax Print Count
28 Total OPC Rotation Time
29 A4/LT Count
30 A4R / LETTER R Count
31 A3 / Ledger Count
32 B4 / LEGAL Count
99 All Counter Clear
5.1.7.

F8 Mode: Service Adjustment

Set the machine to Service Mode and press "8" key on the Keypad.
↓
Press the "START" key.
↓
Enter the desired code number or press "V", "/\" arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the "SET" key.
↓
Enter the desired function code number and press "SET" key.
↓
When the "CLEAR" key is pressed, the selected code input will not be accepted.
↓
Press "STOP" key, then press "FUNCTION" and "CLEAR" keys simultaneously to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
No.
00 Exp. Lamp Replacement
01-05 Not Used
06 Error Log Print/View
07 Error Log Clear
Ver. 1.2
F7 Mode
Item
F8 Mode
Item
Total count of Fax transmitted.
Total count of Fax received.
Total count of Fax printed.
Total Time of OPC Rotation.
Total count of A4 / Letter Print.
Total count of A4-R / Letter-R Print.
Total count of A3 / Ledger Print.
Total count of B4 / Legal Print.
All counters are cleared.
When replacing the exposure lamp.
Procedure:
a) Press the Start key to move the exposure lamp to
the position (approx. 250 mm from the optics
home position) where it can be replaced.
b) To return the optical system to the home position,
press the CLEAR key.*
a) Each time the arrow key is pressed, the machine
errors or paper jam codes stored in memory are
displayed, beginning with the oldest code.
Note:
Only the 30 most recent codes are displayed.
a) Press the Reset key.
A Message "Error code can be cleared with the
Start key" is displayed on the LCD.*
b) Press the Start key.
202
DP-1520P/1820P/1820E
Remarks
Remarks
SEP 2004