Table of Contents
Advertisement
Post-Operation Care
When vehicle is used in salt-water environ-
ment (beach area, launching/loading boats
etc.), rinsing the vehicle with fresh water is
necessary to preserve vehicle and its compo-
nents. Metallic parts lubrication is highly rec-
ommended. Use BOMBARDIER LUBE
(P/N 293 600 016) or an equivalent. This
must be performed at the end of each operat-
ing day.
When vehicle is operated in muddy condi-
tions, rinsing the vehicle is recommended to
preserve vehicle and its components and to
keep lights clean.
NOTE: Never use a high pressure washer to
clean the vehicle. USE LOW PRESSURE
ONLY (like a garden hose). High pressure
can cause electrical or mechanical damages.
Turn Over
When vehicle is turned over or stays tilted on
the side, replace the vehicle in its normal op-
erating position (on all four wheels) and wait
3 to 5 minutes before starting engine. Before
starting engine, check engine oil level and re-
fill if necessary. If the oil pressure light stays
ON after starting engine, stop engine and see
an authorized Bombardier ATV dealer as
soon as possible.
90
ATV Immersion
Should the ATV become immersed, it will be
necessary to take it to an authorized
Bombardier ATV dealer as soon as possible.
DO NOT START THE ENGINE! Immersion of
the ATV can cause serious damage if the cor-
rect restart procedure is not followed.
Storage and Preseason
Preparation
WARNING
Have an authorized Bombardier ATV deal-
er inspect fuel system integrity as speci-
fied in MAINTENANCE CHART.
When a vehicle is not in use for more than one
month, proper storage is a necessity.
See an authorized Bombardier ATV dealer for
proper procedures.
When using your ATV after storage, a prepa-
ration is requ ired. See an authorized
Bombardier ATV dealer for proper proce-
dures.
- Quick Links:
- Engine Oil
Hide quick links:
Advertisement
Table of Contents
