Override Button; Choke Lever - BOMBARDIER Outlander 400 Operator's Manual

Override Button

Located below engine stop switch.
1
V07I07Y
TYPICAL
1. Override button
2. Engine stop switch
This button is used to override the reverse
speed limiter system and while power backing
up. To do this, press the override button.
WARNING
Never activate the override button while
throttle is open as loss of control may re-
sult, causing severe personal injury or
death.
68
2

Choke Lever

Located at bottom of multifunction switch.
This device features a variable lever to ease
cold start.
Position OFF is for normal use with a warm
engine.
V07I08Y
CHOKE LEVER IN THE OFF POSITION
The full choke position is used for lower en-
gine temperature.
V07I09Y
CHOKE LEVER IN THE FULL CHOKE
POSITION
The other positions between OFF and FULL
position, will be use depending on the engine
temperature.