Steering System; Throttle Cable Lubrication - BOMBARDIER Outlander 400 Operator's Manual

STEERING SYSTEM

Throttle Cable Lubrication

Lubrication
The throttle cable must be lubricated with sil-
icone lubricant (P/N 293 600 041) or an equiv-
alent.
WARNING
Always use a silicone-based lubricant. Us-
ing another lubricant (like a water-based
lubricant) could cause the throttle lever/ca-
ble sticking or stiffness.
Open the throttle lever housing.
V07I0FY
1. Remove these screws
1
Separate the housing. Slide rubber protector
back to expose throttle cable adjuster.
1
V07I0GY
1. Cable protector
2. Throttle cable adjuster
3. Lock nut
4. Throttle lever housing
Screw in the throttle cable adjuster.
Remove:
– inner housing protector
1
V07I0HY
1. Inner housing protector
– the cable from the throttle lever housing.
NOTE: Slide cable in clip slot and remove the
end of cable from clip.
2 3 4
119