BOMBARDIER Outlander 400 Operator's Manual page 97

Vehicle cannot reach full speed
1. Engine.
– See ENGINE LACKS ACCELERATION OR POWER.
2. Parking brake.
– Ensure brake lever lock is completely removed.
3. Air filter/box plugged or dirty.
– Check air filter and clean if necessary.
– Check deposits in air box drain.
– Check the position of the air intake tube.
4. CVT dirty or worn-out.
– Contact an authorized Bombardier ATV dealer.
Transmission lever is hard to move
1. Transmission gears are in a position that prevents the transmission lever to work.
– Rock the vehicle back and forth to move the gears in the transmission and allow the
transmission lever to be set.
2. Engine idle speed is set too high.
– Adjust the idle speed. Refer to the SPECIFICATION.
3. CVT dirty or wear.
– Contact an authorized Bombardier ATV dealer.
The RPM increases but the vehicle does not move
1. The transmission is on PARK or NEUTRAL position.
– Select the R, HI or LO position.
2. CVT dirty or wear.
– Contact an authorized Bombardier ATV dealer.
3. Water in the CVT housing.
– Contact an authorized Bombardier ATV dealer.
95