Vehicle Lock; Multifunction Switch; Headlamp Switch - BOMBARDIER Outlander 400 Operator's Manual

R: Reverse
This allows the vehicle to go backward. The
vehicle speed is limited.
WARNING
Before moving vehicle in reverse, ensure
the path behind is clear of obstacles or by-
standers. Remain seated.
N: Neutral
This position disengages the transmission to
allow manual vehicle movement.
H: High gear
This selects the high speed range of the
transmission in the gear box. It is the normal
driving speed range. It allows the vehicle to
reach its maximum speed.
L: Low gear
This selects the low speed range of the trans-
mission in the gear box. It is the working po-
sition. It allows the vehicle to move slowly with
the maximum traction and power.
NOTE: Use the low speed range to pull any
load or to climb a steep incline.

6) Vehicle Lock

Many models of vehicle lock can be used.
P l e a s e , c h e c k w i t h y o u r a u t h o r i z e d
Bombardier ATV distributor/dealer to know
which model you must use with your vehicle.

7) Multifunction Switch

The multifunction switch is located on the left
side of handlebar.
1
V07I02Y
TYPICAL
1. Multifunction switch
The controls located on this multifunction
switch are:
66

Headlamp Switch

Located on the top of multifunction switch.
Place headlamp switch to LO for the low
beam and taillight. Place headlamp switch to
HI for the high beam and taillight.
1
V07I03Y
TYPICAL
1. Headlamp switch
2. Low beam position
3. High beam position
3 2