Start Button; Engine Stop Switch - BOMBARDIER Outlander 400 Operator's Manual

NOTE: Place ignition switch to ON "without
light" position to close the headlamp.
V07A1IY
TYPICAL — ON POSITION " WITHOUT
LIGHT"

Engine Stop Switch

Located at the middle of multi-function switch.
The engine will turn over but will not start if the
engine stop switch is turned to OFF position.
1
V07I05Y
TYPICAL
1. Engine stop switch
This switch can be used to stop engine and
as an emergency control.
NOTE: While engine can be stopped by turn-
ing ignition key OFF, we recommend the en-
gine be stopped by the engine stop switch.
To stop engine, fully release throttle lever then
use the engine stop switch.

Start Button

Located above engine stop switch.
2
V07I06Y
TYPICAL
1. Start button
2. Engine stop switch
To start engine, place the engine stop switch
to RUN.
Press and hold the start button. Release im-
mediately after engine is started.
1
67