Winch Operation; Stopping The Engine; Post-Operation Care - BOMBARDIER outlander max 800 Operator's Manual

To deselect the 4WD mode, press the selec-
tor on 2WD.
V07I0EY
2WD MODE
When the selector is located on the 2WD, the
vehicle is in 2 wheel drive at all time.

Winch Operation

XT Models
See the ATV Winch Operator's Manual. This
manual should be kept in the tool box and re-
main in the vehicle at all times.

Stopping the Engine

WARNING
Avoid parking on slope.
Release throttle and completely stop the ve-
hicle.
Apply the parking brake by using brake lever
lock on brake lever.
Set transmission lever in PARK position.
Push the engine stop switch in OFF position.
Turn key in ignition switch to OFF. Remove
key from ignition switch.
110

Post-Operation Care

When vehicle is used in salt-water environ-
ment (beach area, launching/loading boats
etc.), rinsing the vehicle with fresh water is
necessary to preserve vehicle and its compo-
nents. Metallic parts lubrication is highly rec-
ommended. Use BOMBARDIER LUBE
(P/N 293 600 016) or an equivalent. This
must be performed at the end of each operat-
ing day.
When vehicle is operated in muddy condi-
tions, rinsing the vehicle is recommended to
preserve vehicle and its components and to
keep lights clean.
NOTE: Never use a high pressure washer to
clean the vehicle. USE LOW PRESSURE
ONLY (like a garden hose). High pressure can
cause electrical or mechanical damages.