BOMBARDIER Outlander 400 Operator's Manual page 117

V06G0SY
TYPICAL
Properly reinstall removed parts in the re-
verse order of their removal.
Beam Aiming Adjustment
Adjust beam aiming as follows:
Turn adjustment screws to adjust beam
height and side orientation to your conve-
nience. Adjust both headlamps evenly.
TYPICAL
1. Headlamp cover
2. Adjustment screws
Front Position Lamp
To replace the front position lamp bulb located
in the headlamp housing, proceed as follows.
Push and turn counterclockwise lamp socket
out of headlamp housing.
1. Position lamp socket
2. Headlamp housing
Push bulb in and hold while turning counter-
clockwise to release.
Install the new bulb by first pushing in while
turning clockwise.
Put back the position lamp socket in the head-
lamp housing, turn clockwise to lock in place
and connect the connectors.
Brake Light and Rear Position Lamp
Unscrew lens screws to expose bulbs.
2
V07G27Y
1. Lens
2. Screws
1 2
115