BOMBARDIER Outlander 400 Operator's Manual page 73

Plug connectors to change units from miles to
kilometers. Unplug to return to miles reading.
Fix the change wires to the harness with new
locking ties.
1. Locking tie
2. Connectors to change units
Speedometer Display Codes
Speedometer Reads FAIL
If your speedometer shows FAIL in the multi-
function display, it means that the speedom-
eter as sensed 18 volts in the electrical sys-
tem, caused by a disconnected or defective
voltage regulator.
Check voltage regulator connection or con-
tact an authorized Bombardier ATV dealer for
voltage regulator replacement.
Speedometer Reads SCALE
If your speedometer shows SCALE in the
multi-function display, it means that the dis-
play selector button is stuck in the down posi-
tion or depressed when the electrical system
was activated.
Display Selector Button
Use selector button to change speedometer
display to the desired mode:
- hourmeter
- odometer
- trip meter 1
- trip meter 2
1. Selector button
71