Winch Control Switch; Fairlead; Vehicle Lock; Direction Indicator Switch - BOMBARDIER 2006 outlander max 400 Operator's Manual

28) Winch Control Switch

XT Models
Located on the left side of the handlebar, over

direction indicator switch..

To take out wire rope from winch, press the
left side of switch.
To get wire rope into the winch, press the right
side of switch.
Refer to ATV Winch Operator's manual for
more informations.
V07G22Z
1. In
2. Out

29) Fairlead

XT Models
Located on the front of skid plate.
The fairlead is used to prevent the damages
to the vehicle and guide the wire rope into the
winch.
1. Winch
2. Front skid plate
3. Fairlead
4. Winch hook
2 1

30) Vehicle Lock

Many models of vehicle lock can be used.
P l e a s e , c h e c k w i t h y o u r a u t h o r i z e d
Bombardier ATV distributor/dealer to know
which model you must used with your vehicle.
31) Direction Indicator Switch
This switch is located on the left side of han-
dlebar.
TYPICAL

1. Horn button

2. Direction indicator switch
To activate the direction indicator lamps, push
the switch button on the right or the left side,
depending which direction you picked. Repo-
sition the switch in the middle when the ma-
neuver is completed.
32) Horn Button
The horn button is located on the left side of
handlebar.
TYPICAL
1. Horn button
2. Direction indicator switch
101