Copying Originals; Copier Mode Screen - Ricoh MP 2014 series Operating Instructions Manual

4. Copying Originals

Copier Mode Screen

This section provides information about the screen when the machine is in copier mode.
By default, the display shows the copier screen when the machine is turned on.
If the scanner screen is shown on the display, press the [Copy] key on the control panel to switch to the
copier screen.
Screen in standby mode
1
Ready
1 A4
2
[ 100 ]
D e n s i t y
3
1. Current status or messages
Displays the current status or messages.
2. Current settings
Displays the current tray, reproduction ratio, and scan settings.
3. Selection key items
Displays the functions you can use by pressing the corresponding selection keys.
4. Copy quantity
Displays the current copy quantity. You can change the copy quantity using the number keys.
• The start-up mode can be specified in the [Function Priority] setting under [Admin. Tools]. For
details, see page 151 "Administrator Settings".
DJC036
Mixed
S c a l e I m g Q l t y
4
DJC051
75