Moving The Machine; Moving The Machine On The Same Floor - Ricoh MP 2014 series Operating Instructions Manual

Moving the Machine

This section describes precautions when moving the machine.
Choose your machine's location carefully.
Environmental conditions greatly affect its performance.
• Contact your service representative if you need to lift the machine (such as when relocating it to
another floor). Do not attempt to lift the machine without the assistance of your service
representative. The machine will be damaged if it topples or is dropped, resulting in
malfunction and risk of injury to users. The machine's various handling areas are for service
engineer use only. Do not touch these areas.
• Do not remove the stand that prevents the machine from falling over.
• Contact your sales representative before moving the machine out of the building. Contact your
service representative before moving the machine to another floor. A moving service can be
provided for a fee.

Moving the Machine on the Same Floor

• Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, take care that the power cord is not damaged under the machine. Failing to take these
precautions could result in fire or electric shock.
• If you have to move the machine when the optional paper feed unit is attached, do not push on
the main unit's top section. Doing so can cause the optional paper tray unit to detach, possibly
resulting in injury.
• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.
• Be careful when moving the machine. Take the following precautions:
• Turn off the main power. For details about how to turn the main power off, see page 23
"Turning On/Off the Power".
• Close all covers and trays, including the front cover and bypass tray.
Moving the Machine
229