Removing The Oil Filter - KTM 690 SMC Owner's Manual

Hide thumbs Also See for 690 SMC:
Table of Contents

Advertisement

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing the oil filter

x
9.82
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc., according to regulations.
Thoroughly clean the oil drain plug with a magnet.
Mount the oil drain plug with the magnet and seal ring and tighten it.
Guideline
Oil drain plug with magnet
100201-01
Place a suitable container under the engine.
M12x1.5
20 Nm
(14.8 lbf ft)
138

Advertisement

Table of Contents
loading

Table of Contents