Jacking Up Rear Of Motorcycle; Taking The Rear From The Workstand - KTM 690 SMC Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Jacking up rear of motorcycle

9.3
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Always place the vehicle on a firm and even surface.

Taking the rear from the workstand

9.4
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Secure the motorcycle against falling over.
–
Remove the work stand from the rear and lean the vehicle on the side stand.
–
Insert the work stand adapter in the work stand and screw it into the link forks.
Work stand adapter (61029055110)
Work stand rear (61029055100)
–
Stand the motorcycle upright, align the work stand to the rear, and jack up the motorcy-
cle.
600492-01
56