MAINTENANCE WORK ON CHASSIS AND ENGINE
Adjusting basic position of handbrake lever
9.32
–
Check the thickness of the front and rear brake discs in several places to ensure that it
conforms to measurement
Info
Wear reduces the thickness of the brake disc in the area
Brake discs - wear limit
Front
Rear
100135-10
»
If the brake disc thickness is less than the specified value:
–
Replace the brake disc.
–
Check the front and rear brake discs for damage, cracks, and deformation.
»
If damage, cracks, or deformation are visible on the brake disc:
–
Replace the brake disc.
–
Adjust the basic setting of the handbrake lever to your hand size by turning adjusting
wheel
.
Info
Pull the brake lever forwards and turn the adjusting wheel.
Do not make any adjustments while riding!
600598-10
.
4.0 mm (0.157 in)
4.5 mm (0.177 in)
80
of the brake disc.