MAINTENANCE WORK ON CHASSIS AND ENGINE
Handlebar position
9.22
A
0 0 A
B
0 0 B
–
Fully tighten screw
Guideline
Screw, top triple clamp
–
Mount and tighten screw
Guideline
Screw, steering stem
–
Check play of steering head bearing.
–
Remove the motorcycle from the work stand.
On the upper triple clamp, there are 2 holes at a distance
Distance
between holes
The holes on the handlebar support are placed at a distance
Distance
between holes
The handlebar can be mounted in 4 different positions. In this way, the handlebar can be
installed in the position most comfortable for the rider.
400271-11
.
M8
.
M8
x
(
p. 69)
15 mm (0.59 in)
3.5 mm (0.138 in)
17 Nm
(12.5 lbf ft)
Loctite
243™
20 Nm
®
(14.8 lbf ft)
to each other.
from the center.
71