Changing the Rear Window Wiper
Blade
E175222
Note: The rear wiper arm cannot be lifted
up beyond 25–30°. This is to prevent
damage during automatic car wash.
1.
Move the wiper arms to the service
position manually.
E206062
2. Tightly hold the blade assembly at the
top and rotate it anti-clockwise till the
blade assembly disengages from the
wiper arm.
Endeavour (TEC), EB3B-19G219-ZCA enIND
Maintenance
E206063
3. Align the new blade assembly with the
wiper arm groove and clip them
together.
Note: Make sure that the wiper blade locks
into place.
Note: When the rear wiper blade requires
replacement, the whole blade assembly has
to be replaced.
REMOVING A HEADLAMP
Contact an authorized dealer.
CHANGING A BULB
Lamp Assembly Condensation
Exterior lamps are vented to
accommodate normal changes in pressure.
Condensation can be a natural by-product
of this design. When moist air enters the
lamp assembly through the vents, there is
a possibility that condensation can occur
when the temperature is cold. When
197