Checking The Wiper Blades; Changing The Wiper Blades; Battery Disposal - Ford ENDEAVOUR Owner's Manual

Note: If you only disconnect the negative
battery cable terminal, make sure it is
isolated or placed away from the battery
terminal to avoid un-intended connection
or arcing.
Note: Make sure the battery cable terminals
are fully tightened.
Note: If you disconnect or replace the
battery, you must reset the clock and the
pre-set radio stations once the battery is
reconnected.

Battery Disposal

Make sure that you dispose of
old batteries in an
environmentally friendly way.
E107998
Seek advice from your local authority
about recycling old batteries.
CHECKING THE WIPER
BLADES
E222238
Run the tip of your fingers over the edge of
the blade to check for roughness.
Clean the wiper blades with isopropyl
alcohol or windscreen washer concentrate.
Endeavour (TEC), EB3B-19G219-ZCA enIND
Maintenance
CHANGING THE WIPER
BLADES
Changing the Windshield Wiper
Blades
Note: The windshield wiper blades are
different in length. If you install wiper blades
of the wrong length, the wiper blades can
clash damaging the wiper system.
E170913
1. Manually move the wiper arms to the
service position.
E72899
2. Press and hold the locking button.
3. Remove the wiper blade.
4. Install in the reverse order.
Note: Make sure that the wiper blade locks
into place.
196
2
1