Removing A Headlamp; Changing A Bulb - Ford Expedition 2018 Owner's Manual

Hide thumbs Also See for Expedition 2018:

Table of Contents

5. Locate the vertical adjuster on each

headlamp. Use a #2 Phillips

screwdriver to turn the adjuster either

counterclockwise or clockwise in order

to adjust the vertical aim of the

6. Repeat Steps 3 through 7 to adjust the

other headlamp.

Close the hood and turn off the lamps.

Horizontal Aim Adjustment

Horizontal aim is not required for this

vehicle and is not adjustable.

REMOVING A HEADLAMP

The bumper fascia and grille must be

removed in order to remove the headlamp

assembly, see an authorized dealer if your

headlamp assembly need replacement.

Expedition (TB8) Canada/United States of America, enUSA, Edition date: 201708, Third-Printing-

Let the bulb cool down before removing

it. Failure to do so could result in

personal injury.

Install in the reverse order unless otherwise

Note: If the bulb is accidentally touched,

clean it with rubbing alcohol before

installing it.

Headlamp Bulb

Switch all of the lamps and the ignition

2. Carefully remove the cover.

3. Disconnect the electrical connector.

4. Turn the bulb holder counterclockwise

and remove it.

Note: You cannot separate the bulb from

the bulb holder.

Note: Do not touch the bulb glass.

LED Headlamp Bulb

These lamps have LED bulbs. Contact an

authorized dealer.

WARNING: Bulbs can become hot.

(If Equipped)