Power Liftgate; Closing The Liftgate - Ford ENDEAVOUR Owner's Manual

Opening the Liftgate
Manually
E138632
Note: The manual liftgate button must be
enabled before it can be used, using the
unlock button on the remote control. Press
the button twice within three seconds.
Press the button located in the top of the
liftgate pull cup handle to unlatch the
liftgate, and then pull on the outside
handle.

Closing the Liftgate

E155976
A handle is located inside the liftgate to
help with closing.
Endeavour (TEC), EB3B-19G219-ZCA enIND
Doors and Locks

POWER LIFTGATE

You can operate the liftgate using the
remote control, the instrument panel
switch, or the liftgate switch.
Note: Make sure there is enough headroom
to open the liftgate.
Note: If your vehicle has an automatic
transmission, make sure the transmission
selector lever is in park.
Note: In extreme weather conditions,
automatic opening and closing will not work
with the liftgate frozen to the seal.
Note: The liftgate will stop automatically
while opening and reverse some distance if
there is an obstacle in the way.
Note: The liftgate will stop automatically
while closing and fully open if there is an
obstacle in the way.
Note: You can manually operate the
liftgate.
38
WARNINGS
Do not operate the liftgate unless it
is free from obstruction.
Careless opening and closing of the
liftgate can override the protection
function and cause injuries.
Do not place objects on the liftgate.
Make sure you fully close the liftgate
after operation.
Operate the liftgate only when your
vehicle is stationary.