Table of Contents
Advertisement
Special equipment is required to access
system data. Access to your vehicle's
SYNC module is also required. We will not
access the system data for any purpose
other than as described without consent.
Examples where system data can be
accessed are for a court order, where
required by law enforcement, other
government authorities or other third
parties acting with lawful authority. Other
parties may seek to access the information
independently of us. Further privacy
information is available. See SYNC
Applications and Services (page 259).
(cancel | stop | exit)
help
main menu
Helpful Hints
•
• Make sure the interior of your vehicle
is as quiet as possible. Wind noise from
open windows and road vibrations may
prevent the system from correctly
recognizing spoken voice commands.
•
• After pressing the voice command
icon, wait until after the tone sounds
and a message appears before saying
a voice command. Any voice command
spoken prior to this does not register
with the system.
•
• Speak naturally, without long pauses
between words.
•
• At any time, you can interrupt the
system while it is speaking by pressing
the voice command icon.
Endeavour (TEC), EB3B-19G219-ZCA enIND
SYNC
USING VOICE RECOGNITION
This system helps you control many
features using voice commands. This
allows you to keep your hands on the
steering wheel and focus on what is in front
of you.
Initiating a Voice Session
E142599
the display.
Global voice commands
This command ends the voice session. You
can also cancel a session by holding the
voice button for two or more seconds.
This command provides you with hints,
examples and instructions.
This command restarts the voice session
from the initial starting point.
You can interrupt the system at any time
while it is speaking by pressing the voice
button. You can also cancel a voice session
at any time by pressing and holding the
voice button.
System Interaction and Feedback
The system provides feedback through
audible tones, prompts, questions and
spoken confirmations depending on the
situation and your chosen level of
interaction. You can customize the voice
recognition system to provide more or less
instruction and feedback.
The default setting is to a higher level of
interaction in order to help you learn to use
the system. You can change these settings
at any time.
246
Press the voice button located
on the steering wheel. A list of
available commands appears in
Advertisement
Table of Contents
Troubleshooting
