Removing A Headlamp - Ford VN TRANSIT CUSTOM 2013 Owner's Manual

Note: The windshield wiper blades are
different in length. If you install wiper blades
of the wrong length, the rain sensor may not
work correctly.
Changing the Rear Window Wiper
Blade
1
E93783
1. Lift the wiper arm.
2. Position the wiper blade at right angles
to the wiper arm.
E93784
3. Press the locking lever.
Tourneo Custom/Transit Custom (TTF) Vehicles Built From: 01-09-2013, enAUS, Edition date: 12/2014
Maintenance
2
3
125
5
E93785
4. Disengage the wiper blade from the
wiper arm.
5. Slide the wiper blade to the side.
E93786
6. Remove the wiper blade.
7. Install in the reverse order. Make sure
that the wiper blade locks into place.

REMOVING A HEADLAMP

WARNING
Switch the lamps and the ignition off.
Failure to do so could result in
serious personal injury.
1. Open the hood. See Opening and
Closing the Hood (page 117).
4
6