Ford ENDEAVOUR Owner's Manual page 86

Maintenance
Message
LOW Engine Oil Pressure
Change Engine Oil Soon
Oil Change Required
Brake Fluid Level LOW
Check Brake System
Engine Coolant Overtem-
perature
Power Reduced to Low
er Engine Temp
Transport / Factory
Mode
See Manual
Endeavour (TEC), EB3B-19G219-ZCA enIND
Information Displays
Stop the vehicle as soon as safely possible, turn off the engine.
Check the oil level. If the warning stays on or continues to
come on with your engine running, contact your authorized
dealer as soon as possible.
Displayed when the engine oil life remaining is 10% or less.
See Engine Oil Check (page 191).
Displayed when the oil life left reaches 0%. See Engine Oil
Indicates the brake fluid level is low and the brake system
should be inspected immediately. See Brake and Clutch
Fluid Check (page 193).
Displays when the brake system needs servicing. Stop the
vehicle in a safe place. Contact your authorized dealer.
Displays when the engine temperature is too high. Stop the
vehicle in a safe place and allow the engine to cool. If the
problem persists, contact your authorized dealer. See Engine
Coolant Check (page 191).
Displays when the engine has reduced power in order to help
reduce high coolant temperatures.
Displays to indicate that the vehicle is still in Transport or
Factory mode. This may not allow some features to operate
properly. See your authorized dealer.
Informs the driver that the powertrain needs service due to a
powertrain malfunction.
83
Action
Check (page 191).