Denon AVR-1604 Operating Instructions Manual page 27

(2) EFFECT LEVEL
Use the (left) and
EFFECT LEVEL 10
(Remote control unit)
(3) DELAY TIME
Use the (left) and
DELAY 30ms
(Remote control unit)
(4) D. COMP.
Use the (left) and
D.COMP.
(Remote control unit)
NOTE:
• This parameter is displayed during DOLBY DIGITAL playback.
(5) TONE DEFEAT
Use the (left) and
TONE DEF.
(Remote control unit)
(6) SURROUND BACK SPEAKER
Use the (left) and
SB:ON
(Remote control unit)
(7) DEFAULT
To reset the settings to the factory defaults, use the
buttons to display "Yes".
(Remote control unit)
DEFAULT
(right) buttons to set the effect level.
(Initial)
1 10 15
(left) button (right) button
(right) buttons to set the delay time.
(Initial)
0ms 30ms 110ms
(left) button (right) button
(right) buttons to set the D. COMP.
(Initial)
OFF LOW MID HIGH
OFF
(left) button (right) button
(right) buttons to set the TONE DEFEAT.
(Initial)
ON OFF
ON
(left) button (right) button
(right) buttons to set the SURROUND BACK SPEAKER.
(Initial)
ON OFF
(left) button (right) button
(left) and (right)
YES Y/N NO
Y/N
(left) button (right) button
4
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
• Operating the surround mode and surround parameters from the main unit's panel.
1
Turn the SELECT knob to select the surround
mode.
(Main unit)
• When turned clockwise
DIRECT STEREO DOLBY PRO LOGIC II
VIRTUAL SURROUND MATRIX VIDEO GAME
• When turned counterclockwise
DIRECT STEREO DOLBY PRO LOGIC II
VIRTUAL SURROUND MATRIX VIDEO GAME
To select the surround mode while adjusting the surround parameters, tone
defeat or tone control, press the SURROUND MODE button then operate the
selector.
(Main unit)
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you
want to set.
• The parameters which can be set differ for the different surround modes.
(Main unit)
(Refer to "Surround Modes and Parameters" on page 28.
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTES:
• When playing PCM digital signals or analog signals in the 5CH/6CH STEREO, ROCK ARENA, JAZZ CLUB,
VIDEO GAME, MONO MOVIE or MATRIX surround modes and the input signal switches to a digital signal
encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches
to a DTS signal, the mode automatically switches to DTS surround.
• When the "5CH/6CH STEREO" mode is selected, the display differs according to the Surround Back CH
ON/OFF.
Surround Back CH ON: 6CH STEREO
Surround Back CH OFF: 5CH STEREO
1 2 1, 3
DTS NEO:6 5CH/6CH STEREO MONO MOVIE
JAZZ CLUB ROCK ARENA
DTS NEO:6 5CH/6CH STEREO MONO MOVIE
JAZZ CLUB ROCK ARENA
ENGLISH
27