Denon AVR-1604 Operating Instructions Manual page 22

ENGLISH
6
Set the surround parameters according to the
mode.
(Main unit) (Remote control unit)
• The mode switches as shown below each
time the button is pressed.
MODE Dolby PL MODE CINEMA MODE MUSIC
CINEMA EQ CINEMA EQ
TONE DEFEAT TONE DEFEAT
SURROUND BACK SURROUND BACK CENTER WIDTH
DEFAULT DEFAULT TONE DEFEAT
SURROUND BACK
If you do want the bass and trable to be
adjusted, turn off the tone defeat mode.
7
Set the various surround parameters.
• CINEMA EQ setting
CINEMA EQ OFF
ON OFF
or or
• PANORAMA setting
PANORAMA OFF
ON OFF
or or
• DIMENSION setting
DIMENSION 3
0 3 6
or or
• CENTER WIDTH setting
CENTER WIDTH 3
0 4 7
or or
22
• TONE DEFEAT setting
TONE DEF.
ON
or
• SURROUND BACK SPEAKER setting
SB:ON
ON
or
PANORAMA
• DEFAULT setting
DIMENSION
DEFAULT
YES Y/N
or
Select "Yes" to reset to the factory defaults.
DEFAULT
8
Press the ENTER button to finish surround
parameter mode.
(Remote control unit)
NOTE:
• When making parameter settings, the display
will return to the regular condition several
seconds after the last button was pressed and
the setting will be completed.
DTS NEO:6 mode
ON
1
Select the function to which the component you
OFF
want to play is connected.
or
Example: DVD
OFF
(Main unit)
or
2
Select the DTS NEO:6 mode.
Y/N
NO
or
(Main unit)
• The mode switches as shown below each
time the button is pressed.
3
Play a program source.
4
Select the surround parameter mode.
(Main unit) (Remote control unit)
To perform this operation from the remote
control unit, check that the mode selector
switch is set to "AUDIO".
5
Select the optimum mode for the source.
(Main unit)
MODE cinema
or
1
(Remote control unit)
2
1
(Remote control unit)
DOLBY PL II cinema
DTS NEO:6
8
5, 7
Display
MODE cinema
(Remote control unit)
MODE music
or
2 4, 6 5, 7
The DTS NEO:6 Cinema or
Music mode can be chosen
directly by pressing the
CINEMA or MUSIC button
on the remote control unit
during playback in the DTS
NEO:6 mode.
4, 6
5, 7