HP J2600A Installation Manual page 95

SmartBoot
4. When this message appears, reconnect the network link.
If you reconnect the network link before the message appears, the
router module will receive a response to its Bootp requests and will
boot with the SmartBoot configuration it receives as described on
page C-2.
N o t e
When booting with the factory-default configuration, the router begins
bridging on the WAN port and on the internal LAN port if a SmartBoot
configuration is not received from a remote source (as described on
page C-2). Therefore, if the router is expected to use SmartBoot for
configuration, but instead begins operating in the default bridging mode
due to some unforeseen problem, there may be unexpected effects on
the adjacent networks.
For more information about SmartBoot, refer to HP Routing Services
and Applications, the User's Guide, and the Release Notes. For details
about SmartBoot Helper, refer to the Release Notes.
C-4