HP J2600A Installation Manual page 33

Installation
6. Verify That the Router Starts Up Properly.
5. Do either of the following:
• Press and hold down the Shift key while you double-click on the
• Highlight the hub in the Device Chain List, then press and hold
N o t e
If you don't hold down the Shift key in the preceding step, HP Stack
Manager displays a graphical representation of the hub. To connect to
the router, click on the Router icon button.
6. After a few seconds, HP Stack Manager displays a window showing
the Copyright screen (momentarily) followed by the Main Menu
screen.
Figure 1-13. Copyright Screen
If the Copyright and Main Menu screens appear, the router has been
installed properly and has started up properly; proceed with the setup
procedures in chapter 2. If they do not appear, refer to chapter 4,
"Troubleshooting".
hub in the Device Chain List.
down the Shift key while you click on the Access button.
Figure 1-14. Main Menu Screen
1-23