HP J2600A Installation Manual page 47

Installation
4. Verify the Network Links.
3. Select and examine the individual statistics screen for each routing
and bridging service enabled in the configuration. Verify that the
enabled services are exchanging frames or packets as expected. The
information listed should match the information on the site survey
worksheet and network maps. The statistics should reflect the
circuit groups, network interfaces, and traffic patterns expected for
the router configuration and the devices attached to the network.
The following statistics screens are available. (Service statistics screens
are listed on the Statistics Screen menu for only those services that have
been enabled in the configuration.)
Circuit Statistics: This screen provides summary data for each indi-
vidual circuit, including how many bytes and frames were received
and transmitted, and how many frames contained errors.
Per Second Statistics: This screen provides summary data for traffic
on a per-second basis for each circuit on the router.
Bridge Statistics: This screen summarizes bridge traffic volume for
each circuit group. It shows the number of frames that were
received, forwarded, flooded, and dropped.
DoD IP Router Statistics: This screen provides summary data for
each IP network interface. The interfaces are identified by their IP
addresses. The screen shows the number of IP datagrams received,
forwarded, delivered to upper layer protocols, and dropped.
DECnet Router Statistics: This screen summarizes DECnet traffic
volume for each circuit group. It shows the number of data packets
received, forwarded, and dropped. The statistics do not represent
traffic generated by DECnet routing layer control messages, such as
Hello and routing messages.
IPX Router Statistics: This screen provides summary data for each
IPX network interface. The interfaces are identified by the IPX net-
work numbers of the networks they are connected to. It shows the
number of datagrams received, forwarded, delivered to upper layer
protocols, and dropped.
Xerox (XNS) Router Statistics: This screen provides summary data
for each XNS network interface. The interfaces are identified by the
XNS network numbers of the networks they are connected to. The
screen shows the number of XNS datagrams received, forwarded,
delivered to an upper layer protocol, and dropped.
2-14