Mitsubishi Electric FR-F500 Series Instruction Manual page 15

FR-F520-30K to 55K, FR-F540-30K to 55K
• Removal
1) Remove the front cover mounting screws.
• Reinstallation
1) Fix the front cover with the mounting screws.
Note: 1. Make sure that the front cover has been reinstalled securely.
2. The same serial number is printed on the capacity plate of the front cover and the rating plate of
the inverter. Before reinstalling the front cover, check the serial number to ensure that the cover
removed is reinstalled to the inverter from where it was removed.
REMARKS
• Removal of the wiring port cover for option (DATA PORT)
Push the DATA PORT from the back of the front cover to
remove before fitting the communication option.
5
OUTLINE
Wiring port cover
for option
(DATA PORT)