Checking The Image To Be Transmitted (Preview) - Sharp MX-4100N Operation Manual

CHECKING THE IMAGE TO BE
TRANSMITTED (Preview)
If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before
sending the image.
* The factory default setting is disabled.
Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch
panel.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Scan Internet Fax
Address Book
Direct TX
Sub Address
Address Review
2
File
Quick File
Preview
Select transmission settings and press the [BLACK & WHITE START] key.
3
"Originals are being read" appears while the originals are being scanned, and when scanning is finished, the preview screen
appears on the touch panel. Transmission will not take place until you touch the [Start Sending] key in the preview screen.
Preview
4
System settings (administrator): Default Preview
You can specify whether or not the [Preview] key function will be enabled in the base screens of the image send modes and
in the address book.
Downloaded From ManualsPrinter.com Manuals
Fax USB Mem. Scan
Original
Auto A4
Scan: Send:
Exposure Auto
Resolution
Standard
Special Modes
Auto Reception
Fax Memory:100%
B/W
0001 /0010
Touch the [Preview] key to highlight it.
PC Scan
Auto
Check the preview image and then touch
the [Start Sending] key.
Function Rev.
Transmission begins.
For information on the preview screen, see
SCREEN" (page 4-58).
Display Rotation
Start Sending
4-57
FACSIMILE
"PREVIEW CHECK
Contents