Preview Screen - Sharp MX-4100N Operation Manual

PREVIEW SCREEN

The preview screen is explained below.
(1) Preview image
An image of the selected received image appears.
If the image is cut off, use the scroll bars at the right and
bottom of the screen to scroll the image. Touch a bar and
slide it to scroll. (You can also touch the
scroll.)
(2) Change page keys
When there are multiple pages of images, use these keys
to change pages.
• keys: Go to the first or the last page.
• keys: Go to the previous page or the next
• Page number display: This shows the total number of
(3) [Reset] key
Touch to change the copy settings after checking the
preview image. After changing the settings, touch the
[Preview Again] key to update the preview image with the
new settings.
Preview/Reset
Colour Mode
• A preview image is an image for display on the touch panel. It will differ from the actual print result.
• The preview image reflects certain copy settings and special mode settings. Settings that are reflected in the preview
image are as follows:
Copy settings:
Special modes: margin shift, edge erase, dual page copy, pamphlet copy, covers/inserts, transparency film, 2 in 1/4 in 1,
• Fine lines (such as borderlines printed by the 2in1/4in1 function) may not appear correctly at some zoom ratios.
Downloaded From ManualsPrinter.com Manuals
Preview
(1)
page.
pages and the current page
number. You can touch the
current page number key and
enter a number with the
numeric keys to go to that page
number.
Cancel Preview Again
2-Sided Copy Output
colour mode, ratio, paper size
book copy, card shot, image edit menu, colour adjustment (excluding sharpness and colour balance)
Colour
0001 /0010
(2)
(4) [Display Output] key
Touch to show the selected modes and settings as icons.
Functions that are displayed are as follows:
• 2-sided copying
keys to • Book copy
• Staple (including saddle stitch) function
• Punch function
• Covers/Inserts
This key can only be touched when the entire preview
image is displayed in the preview screen.
(5) [Function Rev.] key
Touch to check special mode items, 2-sided copying, and
output settings.
(6) Display zoom key
Use this to set the zoom ratio of the displayed image.
Changes from the left in the order "Full Page", "Twice", "4
Times", "8 Times". The setting applies to all pages in the
file, not just the displayed page.
(7) "Display Rotation" key
This rotates the image right or left by 90 degrees. The
rotation applies to all pages in the file, not just the
displayed page.
(8) [Start Copy] key
Touch to start printing the copy.
2-140
(3)
Reset
(4)
Display Output
(5)
Function Rev.
(6)
Display Rotation
(7)
(8)
Start Copy
• Pamphlet copy
• Stamp menu
• Transparency inserts
Contents
COPIER