Checking The Image To Be Transmitted (Preview) - Sharp MX-2314N Operation Manual

CHECKING THE IMAGE TO BE TRANSMITTED
(Preview)
(On the MX-2314N, the productivity kit is required.)
If you touch the [Preview] key before scanning the original, you can check the scanned image in the touch panel before
sending the image.
* The factory default setting is disabled.
Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch
panel.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Scan Internet Fax
Address Book
Original
Direct TX Exposure
Sub Address
Resolution
Address Review Special Modes
2
File
Quick File
Preview
Select transmission settings and press the [BLACK & WHITE START] key.
3
"Originals are being read" appears while the originals are being scanned, and when scanning is finished, the preview screen
appears on the touch panel. Transmission will not take place until you touch the [Start Sending] key in the preview screen.
Preview
4
0001
System settings (administrator): Default Preview
You can specify whether or not the [Preview] key function will be enabled in the base screens of the image send modes and
in the address book.
Fax USB Mem. Scan PC Scan
A4
Scan: Auto Send: Auto
Auto
Standard
Auto Reception
Fax Memory:100%
B/W
Sender Info
Function Rev.
Display Rotation
Start
Sending
/0010
Touch the [Preview] key to highlight it.
Check the preview image and then touch
the [Start Sending] key.
Transmission begins.
For information on the preview screen, see
SCREEN" (page 4-58).
4-56
FACSIMILE
"PREVIEW CHECK
Contents