Sharp MX-4100N Operation Manual page 563

Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Program] key.
☞
SPECIAL MODES
Program
Program 1
3
Program 3
Program 5
Program 7
Program 9
Program 11
Program:Program 1
xxx@xx.xxx.com
Scan Internet Fax
Send Settings
Address Review
4
File
Quick File
Preview
• The screen that appears will vary depending on the destination stored in the program.
• The mode cannot be changed here.
• Functions stored in the program cannot be cancelled here.
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
5
When scanning finishes, place the next original and press the [COLOUR START] key or the [BLACK & WHITE START]
key. Repeat until all pages have been scanned and then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key (
Downloaded From ManualsPrinter.com Manuals
(page 5-71)
(1)
Program 2
Program 4
Program 6
Program 8
Program 10
Program 12
Fax USB Mem. Scan
A4
Original Scan: Auto Send:
Exposure Auto Text
Resolution 200X200dpi
File Format PDF PDF
Colour Mode Auto/Greyscale Mono2
Special Modes
) to cancel the operation.
Retrieve the stored program.
(2)
(1) Touch the desired program key.
OK
(2) Touch the [OK] key.
1
2
Select additional settings.
When a program is used, the following settings can be
PC Scan
additionally specified:
Auto
• Image Settings: Original scan size*, send size, file format,
• Send settings
• Special modes: Timer Transmission, Card Shot, File, Quick
* When stored in the program, this cannot be additionally
specified.
5-74
SCANNER/INTERNET FAX
colour mode
File, Transaction Report
Contents