Motor Replacement - Sears 721.37060700 Manual

4. DISASSEMBLY
9. Lever Selector Replacement
1) Remove the 2 screws and remove the Lever
Selector to this direction shown.
2) To reinstall the Lever Selector reverse the
steps above.
10 . Selector Assembly replacement.
1) To remove, angle up then twist off.
2) When reinstalling , angle down and twist on.

11. Motor Replacement

1) Open the HEPA Filter cover and turn the
Exhaust filter counterclockwise and lift it up.
2) Remove the 4 screws on the Body Base
Assembly and remove the Body Base
Assembly.
NOTE : Do not lift the Body Base Assembly
too hard, the leads and connector
are still connected.
- 10 -
MODEL 721.37060700